Need help?Do you have a question about the Seco SYS-C31-DMV and is the answer not in the manual?
SYS-C31-DMV is a boxed PC based on SECO SC31-1121-B495-E2 single board computer.
This manual is intended for ordinary people and installers (expert users).
Details conditions under which the device warranty may be voided.
Details about the manufacturer, SECO S.P.A., including address and contact information.
Provides information about the device's specific identifiers like serial number and manufacturing year.
Describes the identification plate on the device, featuring P/N, S/N, FCC ID, and manufacturer details.
Details the hardware specifications of the SYS-C31-DMV, including processor, RAM, storage, and ports.
Explains the software versioning scheme (C31XXXYY.BBB) and where to find updates.
Lists the FCC, UL certificates, and user manual as reference documents for the device.
Provides FCC compliance statements, operating conditions, and interference mitigation advice.
Details ISED Canada compliance, RF exposure information, and minimum compliance distance.
General safety warnings for device installation, operation, and maintenance, including handling precautions.
Explains the meaning of safety pictograms used on the device and within the manual.
Provides physical dimensions of the device, including length, width, height, and fastening hole spacing.
Identifies and describes the various ports and connectors on the device, including USB, HDMI, Ethernet, and antenna connectors.
Specifies the permissible temperature and humidity ranges for transporting and storing the device.
Lists conditions to avoid during operation, such as extreme temperatures, humidity, dust, and vibrations.
Step-by-step guide for mechanically installing the device, including power supply requirements.
Instructions for mechanically and electrically attaching the antenna to the device.
The SECO SYS-C31-DMV is a robust, boxed PC designed as a gateway, enclosed in a metal box with a heat sink, specifically for industrial machine integration. This manual serves as a comprehensive guide for both ordinary users and expert installers, detailing preliminary information, identification, technical specifications, safety devices, characteristics, components, permitted environmental conditions, installation, maintenance, and waste disposal.
The SYS-C31-DMV functions as an industrial gateway, facilitating communication and data processing within industrial environments. It is built around a SECO SC31-1121-B495-E2 single board computer, housed in a specialized enclosure. The device is designed for integration into industrial machinery, providing computing capabilities and connectivity for various applications. Its primary role is to act as a central point for data exchange and control, ensuring reliable operation in demanding settings. The system level part number for this device is SYS-C31-DMV-01-10.
The SYS-C31-DMV is intended for use by ordinary people and installers (expert users), with a strong emphasis on safety and proper installation. Users are required to read the manual thoroughly before commencing any operation. The device is equipped with an identification plate on its side, displaying crucial information such as the part number (P/N: SYS-C31-DMV-01-10), serial number (S/N: YYMMXXXXX), input power (12 VDC - 5A Max.), and FCC/IC IDs (XMR201903EG25G, 2ALZB-AW276, 22688-AW276, 10224A-201903EG25G). This plate is essential for identification and must not be removed or obscured.
The device is designed for fastening onto industrial machines using threaded pins directly on a mechanical plate. It features a back cover with four universal fastening points for secure integration. The physical dimensions of the device are 177 mm in length, 150 mm in width, and 26 mm in height. The center-to-center distance of the fastening holes on the main body is 50 mm, and on the flanges, it is 162.8 mm.
Connectivity options include multiple USB ports (USB 3.0 Type-A, USB Type-C, USB 2.0 Type-A), HDMI for video output, and two RJ45 Ethernet LAN ports. For serial communication, it provides two RS232 ports on D-SUB DB9 MALE connectors and two RS485 ports. The device also supports wireless communication via IEEE 802.11 ac/a/b/g/n WLAN and Bluetooth 5.0, along with LTE Cat 4 through an internal LTE modem's SIM holder. An LTE 2nd antenna connector is available for DIVERSITY mode, but users are explicitly warned not to connect anything to it as it would invalidate the certification.
Installation involves ensuring the electrical connection on the destination machine is off and the power supply is disconnected. Four 4mm holes must be prepared on the machine, spaced according to the device's fastening points. The device is then fixed to the machine using four screws. Electrical supply is connected via a 12 VDC input with a 2.5mm jack with a lock, requiring a minimum of 20 W power and a maximum current of 5 A. Only certified power supplies compliant with regulations should be used.
The antenna installation process is also detailed. The device comes with an antenna in the package. The plastic box enclosing the antenna is attached to the customer's machine using double-sided adhesive on the bottom cover. The adhesive dimensions are 12mm x 58mm x 0.6mm, with a slot depth of 0.4mm. The antenna cables are color-coded for correct connection: ORANGE SMA MALE RP connector to the LTE connector (most external), BLUE SMA MALE RP connector to the MAIN WiFi/BT connector (second from left), and RED SMA MALE RP connector to the AUX WiFi/BT connector (third from left). A critical warning is issued against using a specific "SMA FEMALE RP CONNECTOR," which must remain free and covered by a cap, as connecting an antenna to it would invalidate the certification.
The operating environmental conditions are crucial for the device's longevity and performance. It is designed to operate within a temperature range of -20°C to +70°C and a non-condensing humidity range of 0-95% at 40°C. The device should not be exposed to altitudes exceeding 2000 m a.s.l., corrosive fumes, excessive or abrasive dust, oil vapours, powder or gas explosive mixtures, salt air, vibrations, impacts, abnormal shocks, or weather conditions beyond specified limits. Rapid thermal changes (above 5K/h) and nuclear radiation are also to be avoided.
Safety is paramount, with numerous warnings provided. Users are responsible for applying preventive and protective measures. Only manufacturer-supplied accessories and certified peripherals should be connected. Operations on the device must be performed by specialized and authorized personnel only, always after disconnecting the electrical power supply. The electrical voltage must match the manual's specifications. The device must always be fixed to a machine before operation. It must be connected to a supply main with protective earth. Modifying the appliance, covering it during operation, or changing the antenna are strictly forbidden as they compromise characteristics and certifications. The device (antenna) must be installed and used more than 20 cm away from the human body.
Maintenance primarily involves cleaning the device. Users should clean the product with a dry cloth when necessary, based on visual inspection. Before cleaning, the device must be disconnected from any power source. The enclosure should only be cleaned with a dry cloth, and liquids of any kind must not be poured on the device to prevent fires or electric shocks. After cleaning, users should verify that the product is still correctly installed.
The warranty is voided if safety regulations are not complied with, the device is tampered with, safety conditions in the management software are altered, the device is used improperly, operations are performed by untrained/unauthorized personnel, changes or repairs are made without manufacturer authorization, instructions are not followed, there are defects in the power supply, maintenance is poor, non-original spare parts are used, or in the event of exceptional events like floods or fires not triggered by the device.
When the electrical equipment is no longer in use, it must not be disposed of with normal municipal waste. The substances and materials contained within the device must be disposed of separately and appropriately. The SYS-C31-DMV is classified as Waste Electrical and Electronic Equipment (WEEE) and must be disposed of correctly according to WEEE regulations.
General| Max Memory | 8 GB |
|---|---|
| SATA Ports | 1 |
| Serial Ports | 2x RS-232/422/485 |
| Power Input | 12V DC |
| Processor Cores | 4 |
| Chipset | Integrated in SoC |
| RAM | Up to 8GB |
| Memory Type | DDR3L |
| Memory Slots | 1 |
| USB Ports | 2x USB 2.0 |
| HDMI | 1 |
| Video Output | HDMI, LVDS |
| Operating System | Linux |
| Mini-PCIe | 1x Full-size Mini-PCIe (shared with mSATA) |
| Graphics | Intel HD Graphics |
To Next Page