Secure C1727 - 3.4 Schedule menu

10 of 40
BGX701-294-R03, PTD user manual
Public
Applying Hold
To setup the Hold function, do the following:
1. Press the top menu button and navigate to the Hold menu (If required press +/- until
you reach the menu)
2. Press + or – to select the Hold duration and then confirm. The following options are
available.
• Hold for 1 hour, 2 hours, 3 hours and 4 hours
• Hold until Cancel (if Hold is already active)
3.4 Schedule menu
Your system comes with a pre-set schedule for 6 time periods to suit most of your needs
and save energy. (See table below).
Weekday
Period
1
Period
2
Period
3
Period
4
Period
5
Period
6
Monday to
Friday
Time
6:00
AM
8:30
AM
11:30
AM
1:30
PM
5:00
PM
10:00
PM
Target
temperature
20°C
18°C
20°C
18°C
21°C
15°C
Saturday
and
Sunday
Time
7:00
AM
10:00
AM
11:30
AM
1:30
PM
5:00
PM
11:00
PM
Target
Temperature
20°C
19°C
21°C
18°C
21°C
15°C
However, you can make alterations in accordance with your preferences and personal
comfort.
The PTD enables you to create independent schedules for
• Zone heating (Setting the target temperature)
• Hot water heating (Time based On/Off)
• Wired thermostats (Time based On/Off)
Using it you can create:
• A weekly schedule
• Separate schedule for weekdays and weekend
• Independent schedules for each day of the week