Securifi Almond2015 User Manual

To edit default wifi settings, tap
on ‘Edit WiFi Settings’.Tap Next
to set-up your Almond account.
STEP 1
Easy Setup Guide.
For tips on how to setup call our tech-support @ 1-855-969-7328
Mail us at support@securifi.com
This screen shows the stylus
location. Tap Next to proceed.
Select ‘Router’ (default selection)
and tap Next.
Tap on Start Wizard.Choose your language. Here we
are choosing English.
How do you want to use Almond
Router
Range Extender
Back Next
Setting up your Almond.
This Wizard will help you:
Connect your Almond to the Internet.
(Optional) Setup your Almond Account
so you can control your Router and
Sensors remotely
Skip Start wizard
Wizard
1
2
Almond is connected to the Internet.
Connet your devices to the Internet using
the below Wifi Settings.
Name (SSID):
John’s Home
Password: fed1234exrt
Back Next
Edit WiFi Settings
Door Sensors Peanut PlugMotion Sensor12V, 1A Power Adapter/
Ethernet Cable
Almond 2015
Stylus
Plug the power adapter into your Almond’s socket, which is located on base of Almond 2015. Then plug
your ethernet cable into your Almond’s ethernet port, which is the top-most port on the right-side of your
Almond 2015.
Wait for the Almond to initialize and follow the below process.
Select your region.
Select Region
North America Europe Japan
China Rest of the World
Language
English Français Deutsch
日本語
русскийEspañol
繁體中文
Portugues
Svenska
Nederlands
Polskie
Türk
Back Next
The stylus is located at
the bottom of your
Almond Router.

Securifi Almond2015 Specifications

General

Brand	Securifi
Model	Almond 2015
Type	Wireless Router
Frequency Bands	2.4 GHz and 5 GHz
USB Ports	1 x USB 2.0
Touchscreen	Yes
Flash Memory	16 MB
Security	WPA/WPA2
Antennas	Internal

Summary

Setting up your Almond

Choose your language

Select the preferred language for the Almond interface.

Select your region

Choose the geographical region for network settings.

Start the setup wizard

Initiate the guided setup process for the Almond device.

Configure Almond Router mode

Select the operational mode for the Almond device, such as Router.

Creating Almond Account

Install and launch the Almond App

Download and install the Securifi Almond app on your smartphone.

Sign up and verify your account

Create a new Almond account using email and password, then verify.

Link your Almond device to your account

Connect your Almond device to your account using a provided code.

Connecting Peanut Plug

Pairing the Peanut Plug (LED blinking)

Add the Peanut Plug when its LED is blinking, following on-screen prompts.

Pairing the Peanut Plug (LED not blinking)

Reset and reconnect the Peanut Plug if its LED is not blinking.

Setting up Door/Window Sensors

Prepare and add the sensor

Insert battery and initiate pairing for the door/window sensor.

Reattach cover and verify sensor

Secure the sensor cover and confirm its status on the Almond touchscreen.

Setting up Motion Sensor

Prepare and add the motion sensor

Insert battery and initiate pairing for the motion sensor.

Finalize motion sensor setup

Reattach cover, verify sensor, and adjust sensitivity and timer settings.

Setting Up Alerts and Arming the System

Configure notification settings

Set notification frequency and preferences within the Almond App.

Arm and disarm the security system

Toggle between arming and disarming the security system via the app.

Adding Auto Arm/Disarm Rules

Connect phone and switch to local connection

Connect your phone to the Almond Wi-Fi and switch to local connection mode.

Create automatic arm/disarm rules

Set up rules for automatic system arming/disarming based on presence.