SEDEMAC GC1200 User Manual

70 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

MANUAL FOR

GC1100:

GENSET

CONTROLLER

Product Manual Version #0.00

ABSTRACT

This manual is intended as

an information guide for

operating SEDEMAC's GC1100

genset controller.

Doc #SED-MAN-GC1100-002

Date: 20-Apr-2018

Table of Contents

Questions and Answers:

D
David HardingAug 7, 2025
What to do if SEDEMAC GC1200 fails to crank-start the engine?
- J
  jacobarnoldAug 7, 2025
  If the SEDEMAC Controller fails to crank and start the engine, you should: * Check the battery voltage. * Enter “configuration mode” in the controller and verify the configuration for the “Start Relay” output. Also, check that “Start Relay” output is working correctly by measuring its output voltage. * Enter “configuration mode” in the controller and verify the configuration of “CRANK DISCONNECT” method. * Verify the configuration of “LLOP SWITCH” polarity. Also, ensure that the 3+2n/4+2n switch & sensor are working OK. Check their wiring.
L
Lauren JohnsonAug 12, 2025
How to troubleshoot SEDEMAC GC1200 Controller that does not power ON?
- M
  Melissa GomezAug 12, 2025
  If the SEDEMAC Controller does not power ON: * Check the battery voltage. * Check the fuse on the battery supply. * Check continuity between battery positive and controller terminal # 2. * Check continuity between battery ground and controller terminal # 1.
B
Brianna DelgadoAug 17, 2025
What to do if SEDEMAC GC1200 generates unnecessary Shutdown or Warning Alarms?
- D
  David RollinsAug 17, 2025
  If the SEDEMAC Controller generates unnecessary “Shutdown Alarms” or “Warning Alarms”, you should: * Check the respective switch/sensor and wiring. * Enter “configuration mode” in the controller and verify the respective threshold configuration.

SEDEMAC GC1200 Specifications

General

Brand	SEDEMAC
Model	GC1200
Category	Controller
Language	English

Related product manuals

Preview: SEDEMAC GC1100