571 Operation/Maintenance Instructions Page 4 of 19
Introductory
This Instruction Manual is designed for you in accordance with The Supply Of Machinery (Safety)
Regulations 1992, and the Supply of Machinery (Safety) (Amended) Regulations 1994, which
implement the European Machinery Directive 89/392/EEC. We strongly recommend that in order
to ensure good safe working practise you read it prior to commencing either installation or
operation of the machine. Your supplier will be pleased to provide any further advice or
assistance that you might require.
Design and Purpose
The Sedgwick Hollow Chisel Morticer Type 571 is a hand fed machine used for producing square
cornered mortice holes of various lengths and widths.
The machine is not designed for any other purposes except as set out above. The
operator of the machine shall be solely liable for any damage that results from
improper use of the machine.
The machine should not be modified in any way without the written consent of the
manufacturer. Please also refer to Section 11.0 regarding use of unauthorised spare parts.
To Next Page
Loading...