pair0C:xx:xx:xx:xx:0B
trust0C:xx:xx:xx:xx:0B
connect0C:xx:xx:xx:xx:0B
Now your BBGW is connected to your bluetooth device. Type
quit
back to the terminal. Play
music on BBGW, then you will hear music on your bluetooth speaker device.
Update to latest software
You need to update the board to latest software to keep a better performance, here we will show
you how to make it step by step.
STEP1. Download the latest software image
First of all, you have to download the suitable image here.
https://www.dropbox.com/s/9qsa75cazhjgb1x/BBGW-blank-debian-8.4-seeed-iot-armhf-2016-
06-27-4gb1.zip?dl=0
Note
Due to sizing necessities, this download may take about 30 minutes or more.
To Next Page
Loading...
