Need help?Do you have a question about the Seeed SenseCAP M2 and is the answer not in the manual?
Establish internet connectivity for the gateway using an Ethernet cable.
Configure Wi-Fi connection for the gateway through the Luci interface.
Details on connecting the SenseCAP M2 gateway using Power over Ethernet technology.
Methods to verify the gateway's network connectivity status using indicators and app.
Obtain and install the SenseCAP Mate mobile application on your device.
Access the SenseCAP platform by registering or logging into your account.
Register the SenseCAP M2 gateway to your account by scanning its unique QR code.
Integrate SenseCAP sensors with the gateway through the mobile app.
Set the sensor's LoRaWAN frequency to match the gateway's configuration.
Access and review comprehensive details about the SenseCAP M2 gateway.
View, analyze, and monitor sensor readings via the SenseCAP Portal and Mate App.
Establish internet connectivity for the gateway using an Ethernet cable.
Configure Wi-Fi connection for the gateway through the Luci interface.
Details on connecting the SenseCAP M2 gateway using Power over Ethernet technology.
Methods to verify the gateway's network connectivity status using indicators and app.
Obtain and install the SenseCAP Mate mobile application on your device.
Access the SenseCAP platform by registering or logging into your account.
Register the SenseCAP M2 gateway to your account by scanning its unique QR code.
Integrate SenseCAP sensors with the gateway through the mobile app.
Set the sensor's LoRaWAN frequency to match the gateway's configuration.
Access and review comprehensive details about the SenseCAP M2 gateway.
View, analyze, and monitor sensor readings via the SenseCAP Portal and Mate App.
General| Model | SenseCAP M2 |
|---|---|
| Category | Gateway |
| RAM | 1 GB |
| LoRa Frequency | EU868, US915, AU915, AS923, KR920, IN865 |
| Wi-Fi | 802.11 b/g/n |
| Ethernet | 10/100 Mbps |
| Operating Temperature | -20°C to 60°C |
| Weight | 250 g |
| Operating System | Linux |
| LoRaWAN Protocol Support | LoRaWAN 1.0.3 |
| Connectivity | Wi-Fi, Ethernet |
| LoRa Output Power | 27 dBm |
| Antenna Connector | RP-SMA |
To Next Page