What does error Er 13 mean on SEFAM Humidifier?
The Er 13 error on your SEFAM Humidifier indicates an I²C bus communication error. Unplug the device from all sources of electrical power, plug it back in, and turn it on. If the error persists, it may require professional assistance.
What does error Er 14 mean on SEFAM Humidifier?
The Er 14 error on DreamStar™ Intro / Intro Evolve SEFAM Humidifier indicates a SPI bus communication error. Unplug the device from all sources of electrical power, plug it back in, and turn it on. If the error persists, it may require professional assistance.
What does Er 100 mean on SEFAM Humidifier?
The Er 100 error on your SEFAM Humidifier indicates a bad humidifier setting. Since the device is operating without the heated humidification feature, try unplugging it from all power sources, plugging it back in, and turning it on. If the error persists, it may require professional assistance.
What does Er 101 mean on SEFAM Humidifier?
The Er 101 error on your SEFAM Humidifier indicates a humidifier temperature problem, and the device is operating without the heated humidification feature. Try unplugging the device from all power sources, plugging it back in, and turning it on. If the error persists, it may require professional assistance.
General| Brand | SEFAM |
|---|---|
| Model | DreamStar Auto Evolve |
| Category | Medical Equipment |
| Language | English |
Essential safety warnings and guidelines for device operation and user responsibility.
Specifies the intended patient population and environment for the DreamStar™ product range.
Lists pre-existing pathologies that make positive pressure therapy contraindicated for patients.
Describes the heated humidification feature for Evolve models and its activation.
Provides definitions for key parameters and terms used in device settings.
Lists the settable parameters, their minimum, maximum, default values, and increments.
Details how to access and navigate the settings menu for Intro/Intro Evolve devices.
Instructions for daily cleaning of the water chamber.
Detailed steps for weekly disassembly and cleaning of the water chamber.
Procedures for surface disinfection and water chamber disinfection using chemical products.
Lists materials and substances that must not be used for cleaning the device.
Explains device messages like mask unplugged or leak detection and their solutions.
Lists specific error codes (Er 01-Er 105) and provides detailed corrective actions for each.
To Next Page
