What to do if SEFAM Humidifier shows Er 11?
The Er 11 error on your SEFAM Humidifier indicates high current consumption. Unplug the device from all sources of electrical power, plug it back in, and turn it on. If the error persists, it may require professional assistance.
How to fix Er 01 error on SEFAM DreamStar Intro Medical Equipment?
If your SEFAM Medical Equipment displays 'Er 01' due to a patient settings problem, reinitialize the default settings by holding down the right control button for 2 seconds until the blinking “DEF?” message appears. Accept by pressing the On/Off button. The device will then be set to the default values and can be reset to your desired settings. If the error persists, further technical assistance may be required.
How to fix Er 09 on SEFAM Humidifier?
The Er 09 error on DreamStar™ Info / Info Evolve and DreamStar™ Auto / Auto Evolve SEFAM Humidifier indicates a Language CheckSum error. Unplug the machine from all electrical power and plug it back in. If the error recurs, it may require professional assistance.
How to stop dry eyes when using SEFAM DreamStar Intro?
Dry or irritated eyes while using SEFAM Medical Equipment are often caused by air leakage around the mask. Try repositioning the mask. If the problem persists, ask your attending physician or home care provider to try another size mask.
How to treat a dry or irritated nose or throat when using SEFAM Medical Equipment?
If your nose or throat feels dry or irritated while using SEFAM Medical Equipment, it could be due to dry air or lack of water in the humidifier chamber. If your device has a water chamber, use the humidification feature and increase the heat level. Also, check and raise the water level in the water chamber if needed.
How to fix a SEFAM DreamStar™ that won't turn on?
If your SEFAM DreamStar™ device doesn't turn on (no display), the power supply cord may not be correctly plugged in, there may be no power, or the device's internal fuse might be defective. Check the connections between the device, the power cord, and the power source. Plug another device into the power source to confirm that current is available. If problems persist, contact your home care provider.
What does Er 04 mean on SEFAM Humidifier?
The Er 04 error on your SEFAM Humidifier indicates high pressure. Unplug the device from all sources of electrical power, then plug it back in and turn it on. If the error continues, further assistance may be needed.
What does Er 07 mean on SEFAM Humidifier?
The Er 07 error on your SEFAM Humidifier indicates a turbine problem. Unplug the device from all sources of electrical power. Check that there are no foreign objects or signs of water in the air outlet. Plug the machine in again and turn it on. If the error persists, it may require professional assistance.
How to fix Er 01 on SEFAM Humidifier?
The Er 01 error on your SEFAM Humidifier indicates a patient settings problem. To fix this, reinitialize the default settings by holding down the right control button for 2 seconds until the “DEF?” message appears. Then, press the On/Off button to accept. The device will reset to its default values, allowing you to set your desired values again. If the error persists, it may require professional assistance.
Why does my SEFAM Humidifier show Er 02?
The Er 02 error on your SEFAM Humidifier indicates a high motor temperature. To resolve this: 1. Unplug the device from the power source. 2. Check and clean the air intake filter. 3. Allow the device to cool down completely. 4. Plug it back in, carefully following the usage instructions. If the error persists, further assistance may be needed.
General| Device Type | CPAP |
|---|---|
| Pressure Range | 4 to 20 cm H2O |
| Humidifier | Integrated |
| Ramp Function | Yes |
| Data Storage | SD card |
| Modes | CPAP |
| Power Supply | 100-240V AC |
| Sound Level | < 26 dB |
To Next Page
