Seg Melbourne - Basic Operation and Input Selection

Basic Operation
Power on/off
1. Connect to the TV to the power supply and turn on the switch.
2. -To turn on the TV
Press POWER
STANDBY
button on the TV or remote control.
Press POWER
STANDBY
button on the TV or remote control.
-To turn off the TV
Input Source select
Press SOURCE button on the TV set or remote control to display input
source menu, and use CH+/- button on the TV set or
button
on remote control to select the input source, press OK button on the
remote control to enter.
Note: Before you select the input source, make sure the
connections are prepared.

12
60 cm (23.6”) LED BLU-TV Melbourne