Normal timer recording
functions
MORE
◆
For timer recordings, clock, date, and stations must be set correctly.
◆
Load a cassette with its safety tab in place
(see page 15) and with sufficient free space for the recording.
Call the video’s "MAIN MENU",
choose "Timer Program".
Decide if you want to record
"Once", "Weekly" or "Daily"...
... and confirm.
If you wish to make changes:
Move to the position you want to
change using the
/
buttons.
Change the setting using the PR+/- or
number buttons.
If all setting are ok, press or ,
till you see “OK : confirm” in the
bottom line.
Confirm.
Switch your video off.
Type in one after the other:
◆ The programme location
number;
◆ the time the broadcast starts,
◆ the time the broadcast ends,
◆ the day of the broadcast, if it
is not today.
◆ Select LP if you wish to make
a very long recording
.
◆ Switch off VPS/PDC here if
you need to (page 11) .
◆ Wait a few seconds after typing a one-digit-number.
◆ If you have made a mistake, move to the position you want to change
using the
/
buttons and change the setting.
◆ If programme timings overlap, the machine will give a warning
message. If you don’t adjust the times, the machine will record the first
programme completely then continue with the second one.
◆ If there is no sufficient free space for the recording on the cassette the
video switches automatically to “LP” for double recording capacity.
◆ The recorder will eject cassettes which have the safety tab removed
(page15).
To Next Page
Loading...
General