Playing back
cassettes
PLAYING
◆
Your TV and your video recorder are switched on.
◆
To see the picture from your video, press the station button on the TV reserved for
video input or the AV (Audio/Video) button.
Load the cassette by pushing
it smoothly and squarely into
the cassette bay, with its
windows pointing up.
Start playback.
Stop playback.
Eject the cassette.
Fast forward or rewind the
cassette from stop.
◆ Press the TV/VCR button to see TV's or the video's (VCR) picture on
the screen (with the SCART connection to the TV).
◆ When you load a protected cassette (e.g. pre-recorded film,
see page 15) playback starts automatically.
◆ PLAY switches back to normal playback.
◆ During still, slow or search, you don’t hear the sound.
◆ If the still picture is jittering, you can steady it by using the PR +/–
buttons.
◆ You can reduce horizontal interference stripes resulting from
inaccurate tracking (when playing tapes of poor quality or recorded
on other machines) by using the PR +/– buttons during playback.
◆ After approx. 5 minutes in still, the cassette plays back
automatically.
◆ NTSC PLAYBACK on PAL TV ; If you playback the tapes, which have
been recorded on NTSC color system, on this VCR, you can watch
the pictures on a PAL TV.
◆ Clock / Counter / Remaining time – page 14.
To Next Page
Loading...
General