Sega Capcom vs SNK 2 - Game Config & Setting Tips; Game Configuration Options Table; Cabinet & Monitor Setting Tips

18
www.seuservice.com
SOUND MODE
DEMO SOUND HALF
CONTINUE
DIFFICULTY
DAMAGE LEVEL
TIMER SPEED
GAME SPEED
EVENT
JOIN
-
IN
STEREO
ON
ON
ON
ON
1 EASY
5
1 LOW
1 SLOW
2
6
2
2
3
7
3
3
4
8 HARD
4 HIGH
4 HIGH
MONAURAL
OFF
OFF
OFF
OFF

GAME CONFIGURATION OPTIONS
1 SLOW 2 3 4 5 HIGH
* Factory settings
* DEMO SOUND HALF setting is available only when ADVERTISE SOUND is set to ON.
A
DVERTISE SOUND setting can be found under the SYSTEM ASSIGNMENTS menu of the NAOMI SYSTEM MENU.
LARGE CABINET
Because of its simple controls, CAPCOM VS. SNK 2 can be played by any game player.
Its unique characters and beautiful graphics that can only be achieved on the NAOMI board will surely appeal even to the
people who had never played video games before.
For this universal appeal of the game, we strongly recommend you to install this
game in a large cabinet and place it at the front of your arcade.
31K MONITOR CABINET
The NAOMI board is capable of handling the screen resolution that is three times as
high as the CP-SYSTEM board.
To exercise its maximum performance, it is indispensable to install the board in the
cabinet equipped with 31K monitor that is capable of high resolution graphics. (Ex.
"BLAST CITY" "MEGALO 410" etc. from Sega)
To enjoy NAOMI's graphics at its best, please use the cabinet with 31K monitor.
(When using 31K monitor, please set the DIP switch on the NAOMI board's
connector side as described in the right chart.)
CAPCOM VS. SNK 2 SETTING TIPSCAPCOM VS. SNK 2 SETTING TIPS
Turn this
switch off.
(Default Setting)
For
15K MONITOR
For
31K MONITOR