EasyManua.ls Logo

Sega Rambo - User Manual

Sega Rambo
68 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OWNER'S MANUAL
IMPORTANT
• Before using this product, read this manual carefully to understand the
contents herein stated.
• After reading this manual, be sure to keep it near the product or in a
convenient place for easy reference when necessary.
800 ARTHUR AVENUE, ELK GROVE VILLAGE, IL 60007-5215
Phone: 888-877-2669 Facsimile: 847-427-1065
WEB: WWW.SAU.SEGA.COM
© SEGA
All manufacturers, cars, names, brands and associated imagery featured in this game are trademarks and/or
copyrighted materials of their respective owners. All rights reserved.
550-30-303
1
ST
PRINTING SEP. 2008
SEGA AMUSEMENTS U.S.A., INC.
TM

Table of Contents

Questions and Answers

  • J
    jameslopezJul 27, 2025
    What to do if the control unit (gun) is not working correctly on Sega Rambo?
    • R
      Rachel NelsonJul 27, 2025
      If the control unit (gun) of your Sega Arcade Game Machines doesn't seem to be operating correctly, first use an Input Test to ensure the microswitches change between ON and OFF. If they don't, replace the faulty microswitches. Also, check that the LEDs on the LED board are on; if not, replace them. Finally, if those steps don't resolve the issue, consider replacing the sensor unit.
  • J
    Jesse FoleyAug 2, 2025
    How to fix unsatisfactory control unit (gun) sighting on Sega Rambo?
    • D
      David JohnsonAug 2, 2025
      If the control unit (gun) sighting on your Sega Arcade Game Machines is not satisfactory, perform a sighting adjustment in the test mode. Check to ensure that the LED lights up; if it does not light up, replace it. Replace the sensor unit if needed. Wipe off any soiled surfaces on the LED board and LED board cover. Ensure the interference prevention wire is properly attached. If strong lighting is positioned near the monitor, consider changing the product's installation location.
  • T
    teresa95Aug 8, 2025
    What to do if Sega Rambo Arcade Game Machines do not activate with the main switch ON?
    • M
      Michelle RodriguezAug 8, 2025
      If your Sega Arcade Game Machines aren't activating when the main switch is ON, first, make sure the power plug is securely inserted into the socket. Next, verify that the power supply/voltage is correct. Finally, if the circuit protector functioned due to a momentary overload, eliminate the cause of the overload and reinstate the AC unit’s circuit protector.
  • R
    richfaithAug 14, 2025
    Why is there no sound from the speaker on my Sega Rambo?
    • B
      Beth WilkersonAug 14, 2025
      If no sound is coming from the speaker of your Sega Arcade Game Machines, first adjust the sound volume. If that doesn't work, perform the sound test to confirm if the board and amplifier are malfunctioning.
  • H
    Harry SharpAug 20, 2025
    What to do if the fluorescent lamp does not illuminate on Sega Rambo?
    • E
      eric70Aug 20, 2025
      If the fluorescent lamp in your Sega Arcade Game Machines does not illuminate, replace the lamp/glow lamp.

Summary

Introduction

IMPORTANT Safety Information

Highlights critical safety warnings and notes regarding product usage and potential hazards.

Handling Precautions

General Handling Warnings

Provides crucial safety warnings for operating and handling the machine to prevent accidents.

Specific Handling Precautions

Details on electronic board handling, projector care, and part compatibility to prevent damage.

Precautions Regarding Installation Location

Installation Site Warnings

Lists unsuitable locations to avoid fire, electric shock, injury, or malfunction due to environment.

Usage Limitations

Specifies electrical requirements, grounding, and power supply guidelines for safe operation.

Precautions Regarding Product Operation

Before Operation Checks

Ensures sufficient lighting, proper projector adjustment, and stable machine placement before use.

During Operation (Customer Attention)

Guidelines for customer safety, including who should not play, handling drinks, and preventing misuse.

Assembly and Installation

Assembly and Installation Warnings

Emphasizes that assembly must be done by qualified professionals to prevent severe accidents.

Fixation to Installation Site

Details on adjusting adjusters to ensure the machine is level and stable on the floor.

Turning on the Power

Instructions and warnings related to connecting and turning on the power, including DVD drive care.

Assembly Check Procedures

Precautions When Moving the Machine

Moving Warnings and Cautions

Explanation of Test and Data Display

Test Mode Overview and Warnings

Controller Adjustment and Aiming

Periodic Inspection

Periodic Inspection Items and Schedule

Troubleshooting

Troubleshooting Table and General Warnings

Provides a table of common problems, causes, and countermeasures, with critical safety warnings.

Game Board (LINDBERGH RED EX)

Game Board Warnings and Precautions

Critical safety warnings for handling the game board, including static electricity and connector usage.

Removing the LINDBERGH RED EX

Sega Rambo Specifications

General IconGeneral
BrandSega
ModelRambo
CategoryArcade Game Machines
LanguageEnglish

Related product manuals