7
6
ASSEMBLY AND INSTALLATION
ASSEMBLY AND INSTALLATION
4
● This work should be carried out by site maintenance personnel or other qualied
professionals. Work performed by non-technical personnel can cause a severe
accident such as electric shock. Failing to comply with this instruction can
cause a severe accident such as electric shock to the player during operation.
● Perform assembly work by following the procedure herein stated. Failure to
comply with the instructions can cause electric shock.
● Perform assembling as per this manual. Since this is a complex machine,
incorrect assembling can cause an electric shock, machine damage and/or
improper functioning as per specied performance.
● When assembling, more than one person is required. Depending on the
assembly work, there are some cases in which working by one person alone
can cause personal injury or parts damage.
● Ensure that connectors are properly connected. Improper connections can
cause electric shock.
● Provide sufcient space so that assembling can be performed. Performing
work in places with narrow space or low ceiling may cause an accident and
assembly work to be difcult.
● To perform work safely and avoid serious accident such as the cabinet falling
down, do not perform work in places where step-like grade differences, a ditch,
or slope exist.
● Be careful not to damage the wires. Damaged wires may cause electric shock
or short circuit or present a risk of re.
● Do not leave power cords, ground wires, or network cables exposed in areas
of heavy foot trafc. Doing so may cause them to become damaged, possibly
resulting in electric shock and/or short circuits. When laying wiring across the
oor, always use safety covers to protect the wires. (Wiring diameter: power
cable - approx. Ø 8.)
To Next Page
Loading...
