51
17
GAME BOARD (LINDBERGH RED EX)
16-1 FIG. 01
GAME BOARD (LINDBERGH RED EX)
11
● The work described below should be carried out by the site maintenance
personnel or other qualied professional. Work carried out by personnel without
the necessary skill or technology can cause accident.
● In order to prevent electric shock and short circuit hazards, be sure to turn
power off before performing work.
● Be careful not to damage the wires. Damaged wires may cause electric shock
or short circuit or present a re risk.
● Do not use this product with connectors other than those that were connected
and used with the LINDBERGH RED EX at the time of shipping. Do not carelessly
connect wires to connectors that were not used at the time of shipping, as this
may cause overheating, smoke or re damage.
● When connecting the connectors, be sure to attach them correctly. There is
only one correct way in which they must be connected. Attempting to connect
them incorrectly may cause damage to the pins on the connectors, and cause
electric shock, short circuit or re.
In this product, setting changes are made during the Test Mode. The LINDBERG
RED EX need not be operated. Use the LINDBERGH RED EX, etc. as is with the
same setting made at the time of shipment so as not to cause electric shock and
malfunctioning.
Static electricity from your body may damage some electronics devices on the IC
board. Before handling the IC board, touch a grounded metallic surface so that the
static electricity can be discharged.