Sega FORD RACING TWIN-FULL BLOWN User Manual

420-FRSM-02UK REV 2
TWIN DRIVING CABINET
SERVICE MANUAL
• Before using this product, read this MANUAL carefully to understand the contents
stated herein.
• After reading this MANUAL, be sure to keep it available nearby the product or
somewhere convenient in order to be able to refer to it whenever necessary.
Manufactured in the UK by
Amusements Europe Limited

Sega FORD RACING TWIN-FULL BLOWN Specifications

General

Manufacturer	Sega
Category	Arcade Game Machines
Model	FORD RACING TWIN-FULL BLOWN
Type	Driving
Players	2
Maximum Resolution	Standard Resolution
Sound	Stereo
Monitor	CRT
Control	Steering wheel, pedals
Power Supply	110V

Summary

Before Using This Product

Safety Precautions and Warnings

Explains WARNING, CAUTION, IMPORTANT symbols and basic safety rules.

Essential Safety Procedures

Key safety steps like turning off power, using correct fuses, and grounding.

Inspection Immediately After Transporting

Post-Transport Inspection Checklist

Handling Precautions

Electrical Safety Measures

Precautions for handling power cords, wiring, and preventing electric shock.

Component Handling Safety

Guidelines for safe handling of IC boards, CRT surfaces, and static discharge.

Precautions Regarding Location and Installation

Installation Site Requirements

Electrical Installation Requirements

Details on power supply compatibility, RCD usage, and wiring standards.

Operation

Pre-Operation Safety Checks

Fuses

Assembling with Precautions

Assembly Procedure and Safety

Steps and safety guidelines for assembling the game cockpits and connecting components.

Securing the Machine into Location

Machine Leveling and Stability

Installing the Power Cables

Turning the Power On

Assembly Check

Input, Sound, and CRT Tests

Precautions When Moving the Machine

Machine Moving Safety

Critical safety steps for unplugging, retracting adjusters, and securing units during movement.

Explanation of Test and Data Display

Test Mode Overview

Introduction to SYSTEM and GAME TEST MODES for diagnostics and settings.

Machine Installation Tests

Test Mode

Input and Calibration Tests

Game Data and Settings Tests

Handle Mechanism

Handle V.R. Replacement and Adjustment

Shift Lever

Accelerator & Brake

Accelerator/Brake V.R. Adjustment

Coin Selector

Monitor

Monitor Safety Precautions

Warnings and guidelines for safe installation, removal, and handling of the monitor.

Game Board

Removing the Game Board

UGCI Board

Network Play

Network Play Setup Requirements

Essential steps for linking machines for multiplayer network play.

Network Play Configuration

Coin Settings

VTS Credit Board Options

Appendix A - Electrical Schematic

Electrical Schematic Diagrams