Refer to 9-1 and start the Test Mode.
Using Test Mode, verify points such as the proper assembly of the machine. Also verify normal operation of the
LINDBERGH RED EX, boards which have been connected, and the product’s various input and output devices. In
Test Mode, conduct the tests described below.
(1) MONITOR TEST
When MONITOR TEST is chosen from System Test Menu Screen, a screen to test the Monitor will be displayed.
Though the Monitor is pre-adjusted at the time of shipment from the factory, view the test screen to determine
whether or not adjustment is necessary. If so, refer to Chapter 11 and adjust the Monitor.
6-11 FIG. 01
6-11 FIG. 02
(2) SPEAKER TEST
When SPEAKER TEST is chosen from System Test
Menu Screen, a screen to test each of the speakers will be
displayed.
The RIGHT SPEAKER and the LEFT SPEAKER are
the only speakers which can be checked by just changing
their respective settings to ON and OFF.
SPEAKER TEST
RIGHT SPEAKER OFF
LEFT SPEAKER OFF
REAR RIGHT SPEAKER OFF
REAR LEFT SPEAKER OFF
CENTER SPEAKER OFF
WOOFER SPEAKER OFF
-> EXIT
SELECT WITH SERVICE AND PRESS TEST
6-11 FIG. 03
MONITOR TEST 1/2
132
PRESS TEST TO NEXT
MONITOR TEST 2/2
PRESS TEST TO EXIT
4-5 ASSEMBLING CHECK
To Next Page
Loading...
