● Do not turn off the power to the DVD DRIVE when its access lamp is on or ashing,
as this could cause damage to the device.
● Do not allow any foreign materials, such as liquids, metals or smoke inside the
DVD DRIVE.
● Use a soft, dry cloth to wipe off any dirt or marks on the DVD DRIVE.
- If you need to use a cleaning agent, always use a “neutral” agent diluted in
water.
- Never use products or cleaning agents containing benzene, alcohol, thinners,
etc.
● Do not touch the lens inside the DVD DRIVE. Doing so may prevent it from reading
accurately.
● The chip components on IC boards can be damaged by electrostatic discharge
from the human body. Before handling an IC board, always neutralize any static
charge in the body by touching a grounded metal surface.
● Some parts are not designed and manufactured specically for the kit. The
manufacturers may discontinue, or change the specications of such general
purpose parts. If this is the case, SEGA cannot repair or replace a failed kit
whether or not a warranty period has expired.
To Next Page