Connecting to the New Genesis Model
Please check the following before you connect your
Genesis 32X to your new Genesis model:
• Is your Genesis properly connected to your TV?
• When using your Sega CD, is your Genesis
connected properly to your Sega CD?
If you answered "Yes" to both of the questions, turn the
Power Button OFF, and unplug the AC Adaptors from
the electrical outlets.
1. Disconnect the Sega RF Unit (or Sega
Audio/Video Cable) from the Genesis and TV.
2. Connect the supplied Spacer for New Genesis
Model to the Genesis 32X.
3. Firmly insert the Genesis 32X into the cartridge
slot on the Genesis.
4. Plug one end of the supplied Connector Cable into
the A/V OUT Jack on the Genesis and plug the
other end into the A/V IN Jack on the Genesis
32X. Take care not to plug the Connector Cable
Into the A/V OUT Jack on the Genesis 32X.
5. To continue, see "Connecting Your TV."
Connecting to the Genesis CDX
Please check the following before you connect your
Genesis 32X to your Genesis CDX:
• Is your Genesis properly connected to your TV?
If you answered 'Yes," turn the Power Button OFF, and
unplug the AC Adaptors from the electrical outlets.
• Disconnect the Sega Stereo Audio/Video Cable (or
Sega RF Unit) from the Genesis CDX and your
TV
• Connect the optional Spacer for Genesis CDX to
the Genesis 32X
• Firmly insert the Genesis 32X in the cartridge slot
on the Genesis
• Plug one end of the supplied Connector Cable into
the A/V OUT Jack on the Genesis CDX and the
other end into the A/V IN Jack on the Genesis
32X. Take care not to plug the Connector Cable
into the A/V OUT Jack on the Genesis 32X.
• To continue, see "Connecting Your TV."
Note: Information for the Spacer for Genesis CDX is
available by calling 1-800-USA SEGA.
To Next Page
Loading...
