Sega Saturn User Manual

Connecting to a TV or VCR without Audio/Video Sockets
(Not available in France)
Connections to a TV/Monitor and Antenna
If an antenna cable is plugged into your TV (or if you have cable TV), use a Sega Saturn RF Unit (sold separately).
1. Unplug the antenna cable from the TV, and plug it into the RF Unit.
2. Plug the RF Unit antenna cable into the TV.
3. Plug the RF cable into the A/V OUT socket on the back of the Sega Saturn console.
Note: If your television is connected to a VCR, check to see if your VCR has audio and video plugs to which to connect.
TV with Connected VCR
1. If a VCR is already connected between the antenna and TV terminal, use a Sega Saturn RF Unit (sold separately).
Unplug the antenna cable of the VCR from the TV terminal. Then, plug this cable into the RF Unit.
2. Plug the RF Unit antenna cable into the TV terminal.
3. Plug the RF Cable into the A/V OUT socket on the back of the Sega Saturn console.

Sega Saturn Specifications

General

Manufacturer	Sega
Type	Home video game console
Generation	Fifth generation
Media	CD-ROM
Resolution	320×224 to 704×480
Controller Ports	2
Best-selling Game	Virtua Fighter 2
Units Sold	9.26 million
CPU	Two Hitachi SH-2 32-bit RISC @ 28.6 MHz
Graphics	VDP1 and VDP2 video display processors
Sound	Yamaha FH1 DSP
Memory	2 MB RAM, 1.5 MB video RAM, 512 KB sound RAM
Dimensions	260 mm × 230 mm × 83 mm