124
Troubleshooting Procedures (cont.)
Tire is Flat or Will Not Hold Air
Problem:
One of the Tires on your Segway PT is flat or will not hold air.
Review the following service procedure prior to troubleshooting this problem.
• "Checking Tire Inflation Pressure" (p. 107)
Recommended Action:
1. Check for Tire damage. If the Tire is damaged, contact an Authorized Segway Dealer or Distributor to order a replacement Tire/
Wheel Assembly.
2. If there is no visible Tire damage, check to make sure the Tire valve stem core is tight. Tighten the valve stem if necessary.
3. Inflate the Tire and check for leaks. If the Tire goes flat or will not maintain inflation pressure, contact your Segway Dealer.
To Next Page
Loading...
