Segway ninebot Gokart Series - Powering on automatically forward or backward

T h e
p h o n e
c a n n o t
c o n n e c t
t o G o k a r t
B l u e t o o t h
1. Authorization related to the mobile phone is
not enabled or the operation is incorrect;
2.Gokart Bluetooth is occupied by other
devices;
3. The vehicle can be searched, but the pairing
cannot be completed;
4. Gokart cannot be found.
1. Enable mobile phone
authorization; 2.Gokart
Bluetooth has been
connected to other
devices;
3. Pairing fails;
4. The Gokart controller is
faulty.
1. Check whether the Bluetooth and positioning functions of
the mobile phone are turned on, and whether the relevant
permissions of the No. 9 travel APP are turned on and not
prohibited by the mobile phone system; Point re-search
vehicle re-add attempt;
2.Gokart blue light flashing indicates that the Bluetooth is not
connected, blue light steady on indicates that the Bluetooth
is connected, connected state, can not connect with other
mobile phones;
3. Check whether the mobile phone network is normal. When
the APP prompts you to step on the brake to complete the
pairing, you need to step on the brake for a long time to
complete the pairing. Pay attention to stepping on the brake
to the end to eliminate the situation that the main brake of
the foreign body card cannot be stepped on to the end;
4. Replace the Gokart controller.
4.5.4
Error Code
Troubleshooting
Result
Solution
G o k ar t
t u r ns o n
au t o m at ic
al l y t o g o
f o r w ar d o r
ba c k wa r d
1. Check whether balancing vehicle is
upgraded to the latest firmware and switched to
the Gokart mode.
2. Check whether the accelerator and brake
pedal bounce back in place;
1. Check whether
balancing vehicle is
upgraded to the latest
firmware and switched to
the Gokart mode.
2. Check whether the
accelerator and brake
pedal bounce back in
place;
1. Connect the balancing vehicle with the kart after
upgrading to the latest firmware and switching to Gokart
mode;
2. Ensure that the accelerator brake pedal bounces back in
place. If it fails to rebound in place, replace it with a new
accelerator brake pedal assembly;
4.5.5
Unable to reach maximum speed
Error Code
Troubleshooting
Result
Solution