6 First Ride
1 Download and install the App. Register and then
login.
2 Power on. The Bluetooth icon on the dashboard
for connection.
4 If the vehicle emits intermittent beeping during
use, connect to the App and check the reason.
3
according to the instructions in the App.
read the Safety Instructions and only use the Ninebot S after new rider training has been completed.
Search for Segway-Ninebot in the App Store or scan the QR code to download the App.
To pair Ninebot S with your phone
4 Assembling
Press the power button to light up the display panel. Your Ninebot S beeps, indicating it's powered on successfully. Press the
The factory setting
of the Ninebot S is pre-set as unactivated. When it's power on, the Ninebot S will continue to beep if there is someone
standing on the foot mat, and both speed and sensitivity will be very limited. An unactivated Ninebot S cannot be used
immediately. Install the App on your mobile device and activate it following the instructions in the App.
5 Charging
port cover plate
rubber cover of
the charging port
Insert the plug
into the
charging port
•Do not puncture or open the enclosure, avoid contact to the battery terminals with any metal objects. Which may cause
electric shocks, lead to death or loss of warranty.
battery and the charger.
7 8
To Next Page
Loading...
