SEI MS070400TX - Attaching Top Panel and Back Panel; Drawer and Door Assembly

Large TV/Media Stand
Assembly Instructions
Step 1. Insert Wood Dowels(A) in
predrilled holes in the Left Middle
Panel(5) and Wood Dowels (A) in
the other side of Fixed Shelf(6). Be
sure the cross bar on the Left
Middle Panel(5) faces the Right
Side Panel(3).
Step 2. Attach Left Middle Panel(5) to the
Bottom Panel(1) and fasten by
Bolts(B).
Step 3. Screw Feet(8) and center foot(18)
into Bottom Panel(1)
and tighten.
Figure 3
Figure 4
Figure 5
Step 1. Attach the two side Doors(9,10)
to hinged side panels(2,3) and
insert the hinge.
Step 1. Attach the Magnet(K) to the Top
Panel(11) with Screw For
Magnet (L).
(
I
)
Magnet P
in
Quantity
of 2
(
K
)
(
L
)
Quantity
of 2
Quantity
of 4
(
J
)
3mm x 10mm
Screw For Magnet Pin
Quantity
of 2
Magnet
3.5mm x 15mm
Screw For Magnet
(A)
(B)
1/4” x 1” Bolt
8mm x 30 mm
Wood Dowel
Quantity
of 6
Quantity
of 2
B
B