Line feed spacing
This function selects the default line feed spacing. When no line feed spacing is set in the
software command, this value is used as a linefeed.
Slashed zero
The zero style is selected as either “0” (no-slash) or “
Ø
” (slashed).
Set default tab stops
The default horizontal tab stops are selected from different tab intervals. This tab setting
becomes effective when the printer receives tab commands from the host system.
Lock-in the page length
The page length and the top and bottom margins set on the front control panel are locked-in.
Any page layout related software command cannot override this setting.
20 ZERO STYLE
ZERO: NO-SLSH
ZERO: SLASHED
........... “0” (no-slash) is selected
........... “
Ø
” (slashed) is selected
21 TABULATION
TAB: 2 CHAR
TAB: 4 CHAR
TAB: 6 CHAR
TAB: 8 CHAR
TAB: 10 CHAR
TAB: 12 CHAR
19 LF PITCH
LF: 6 LPI
LF: 8 LPI
LF: 9 LPI
LF: 3 LPI
LF: 4 LPI
22 PAGE LOCK
LOCK: YES
LOCK: NO
40
5. Extended setup options (19-22)
Prepared by :: songsaluang(at)PTC
PROFESSIONAL HI - TECH CARD CO.,LTD. Tel 0-2906-5300 Fax 0-2906-5301 Email info@procard.co.th Website www.procard.co.th
To Next Page
