TECHNICAL GUIDE
Cal. 6N76A
8/18
●
How to install the DATE DIAL GUARD
1) Put the date dial guard on the main plate so
that the A and B portions are over the guide
pins, as shown in the illustrations at right.
2) Move the protrusion D of the date dial
guard in the counterclockwise direction so
that it is caught under the main plate.
3) Slightly move the protrusions C and E in
the counterclockwise direction alternately
to set them under the main plate. Then, set
the A and B portions of the date dial guard
to the guide pins.
4) Check that the date dial guard is fixed
securely to the main plate.
⑧
DATE DIAL GUARD
Protrusion D
B PortionProtrusion C
Protrusion E A Portion
●
How to install the BATTERY
Insert the battery aslant in the direction shown by the arrow. Check that the battery connection (+)
securely touches the side face of the battery.
Coil block
Main plate
⑰
BATTERY CONNECTION (+)
Make sure the side of the battery touches
the Battery Connection (+)
Battery Connection (+)
Battery
Side view
To Next Page
Loading...
