Seiko 7T84 - Yacht Timer Mode

English
24
English
25
STOPWATCH MODE
u
The stopwatch can measure up to 12 hours in 1/5-second increments. When
the measurement reaches 12 hours, the stopwatch automatically stops.
u
Measured time is indicated by the center hand and the two hands of the
small watch.
u
Split time measurement is possible.
l
How to reset the stopwatch
While the STOPWATCH hands are moving
1. Press button A to stop the stopwatch.
2. Press button B to reset the stopwatch.
While the STOPWATCH hands are stopped
[When the stopwatch is stopped]
1. Press button B to reset the stopwatch.
[When the split time measurement is displayed while the stopwatch is measuring.]
1. Press button B to release the split time display and return to the ongoing
measurement movement.
2. Press button A to stop the stopwatch
3. Press button B to reset the stopwatch
[When the split time measurement is displayed and the stopwatch is stopped.]
1. Press button B to release the split time display.
2. Press button B to reset the stopwatch.
<STANDARD MEASUREMENT>
<ACCUMULATED ELAPSED TIME MEASUREMENT>
<SPLIT TIME MEASUREMENT>
<MEASUREMENT OF TWO COMPETITORS>
STOP
RESET
START
START
START
START
STOP
RESTART
STOP
RESET
SPLIT
SPLIT
RELEACE
STOP
RESET
FINISH TIME
OF 1ST
COMPETITOR
2ND
COMPETITOR
FINISHES
FINISH TIME
OF 2ND
COMPETITOR
RESET
A
B
A
A
A
B
A
A
B
B
B
B
B
B
A
A
A
A
* Restart and stop can be repeated as many times as required by pressing
button A.
* Measurement and release of the split times can be repeated as many times
as required by pressing button B.
STOPWATCH OPERATION
1
2
3
4
5
6
7
8
9
10
1
1
12
1
3
1
4
15
STOPWATCH 1/5-second hand
STOPWATCH hour hand
STOPWATCH minute hand