Seiko 8B92 - Stopwatch Operation Guide; Preparing the Stopwatch for Use; Performing Stopwatch Measurements

■ Before using the stopwatch
Before using the stopwatch, reset it and check that the stopwatch hands (second hand, minute
hand) are stopped at “0 seconds and 0 minutes”.
Refer to the following procedure for resetting the stopwatch.
•
How to reset the stopwatch
* The stopwatch can be operated when the crown is at the normal position.
Button C
Button D
Current status
The stopwatch has
stopped.
The stopwatch is
operating.
Press Button C and Button D
to make the stopwatch
hands move.
EN
40
5
HOW TO USE THE STOPWATCH
If any of the stopwatch hands do not return to 0 minute 0 second when the stopwatch is reset, set
the stopwatch hands to the preliminary hand position.
→ “Setting the Preliminary Position of the Stopwatch Second and Minute Hands” P. 91
Press Button C, and then
press Button D
•
Before pressing the buttons, make
sure that the stopwatch hands are
moving.
Checking the position of the stopwatch hands after
resetting the stopwatch
The stopwatch hands have
stopped at the
“0 seconds
and 0 minutes” position
The stopwatch is
reset.
The stopwatch hands have
stopped at a position other
than the
“0 seconds and 0
minutes” position
Adjust the stopwatch
hands to the
preliminary position
→ P.91
EN
41
5
HOW TO USE THE STOPWATCH
How to use the stopwatch
• Standard measurement Ex. 5,000 meters running
C C D
Start Stop Reset
Start the measurement Goal Reset the stopwatch to
0 minute 0 second.
Example of measurement:
20 minutes 41 seconds
Button C Button C
Button D
EN
42
5
HOW TO USE THE STOPWATCH
• Accumulated elapsed time measurement Ex. Measuring the time for a soccer match
C C C C D
Start Stop Start Stop Reset
Start match. Stop match. Start again.
The match ends.
Reset the stopwatch
to 0 minute
0 second.
Button C Button C Button C Button C
Button D
•
Restart and stop of the stopwatch can be repeated.
EN
43
5
HOW TO USE THE STOPWATCH