EasyManua.ls Logo

Seiko S351 - Specifications

Seiko S351
7 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SPECIFICATIONS
1. Frequency of crystal oscillator·················32,768 Hz (HzCycles per second)
2. Loss/gain (monthly rate)··························Less than 0. 0006% or 15 seconds at normal tem-
                   perature range (5°C 35°C)
3. Operational temperature range···············10°C 60°C (For the display···0°C〜+50°C)
4. Display medium·······································Nematic Liquid Crystal, FEM (Field Effect Mode)
5. Battery·····················································Miniature lithium battery SB-T751, 1 piece
6. Battery life indicator·································Flashing “ ” mark is shown on the display.
7. IC (Integrated Circuit)······························C-MOS-LSI, 1 piece
8. Display system
Time calculation mode·······························Current time (hour, minutes and seconds),
                  calculation data (hour, minutes and seconds) and
                  “Error” mark
Timer mode················································Current time (hour, minutes and seconds),
                  remaining time (hour, minutes and seconds), “STOP”
                  and “Error” marks
Time mode·················································Current time (hour, minutes and seconds) and “Error”
                  mark
Stopwatch mode········································Current time (hour, minutes and seconds), measured
                  time (hour, minutes and seconds), “SPLIT”, “STOP”
                  and “Error” marks
The specifications above are subject to change without prior notice, for product improvement.

Related product manuals