TECHNICAL GUIDE
Cal. V115A
12/16
l
How to measure the current consumption for the circuit block alone
1. Apply the probes of the tester as shown in the illustration.
2. Shut out the light from the circuit block.
Note: If the circuit block is exposed to light, an extremely high measurement value may be
obtained.
3. After checking that a stable measurement is obtained with the tester connected, read the current
consumption.
l
Structure of the circuit block
Coil output terminal
Crystal unit
Input terminal (+)
Input terminal (-)
C-MOS-IC
-
the range of 40 μA of SUPPLY V (=1.55V) &
light in order to obtain the correct measure-
ment.
To Next Page
Loading...
