What to do if the STOPWATCH hands do not return to the 0 position when the stopwatch is reset on my Seiko Watch?
If the STOPWATCH hands on your Seiko Watch do not return to the 0 position when the stopwatch is reset, it might be because the stopwatch hand positions have moved out of correct alignments, being affected by external sources, or because the internal IC had been reset. Adjust the STOPWATCH hands to the 0 position.
What to do if my Seiko V194 Watch stopped after charging?
If your Seiko watch has been charged for longer than the required time for a full charge, but the second hand does not resume one-second interval movement, it could be due to several reasons: 1. The light the watch has been exposed to was too weak. In this case, recharge the watch sufficiently by exposing it to light. 2. The built-in IC has fallen into an unstable condition. To resolve this, reset the watch by following the instructions in 'IMPROPER FUNCTION.' (P.28) 3. The watch has been left or worn in extremely high or low temperatures. Return the watch to a normal temperature so that it works accurately as usual, and then reset the time. 4. The watch has been left close to an object with a strong magnetic field. Correct this condition by moving and keeping the watch away from the...
Procedure to verify if watch hands are at their preliminary positions.
Steps to adjust the power reserve indicator and stopwatch hands to their correct positions.
Procedure for setting the main time on the watch dial.
Instructions for resetting the stopwatch hands to their zero position.
General| Brand | Seiko |
|---|---|
| Model | V194 |
| Movement Type | Quartz |
| Caliber | V194 |
| Display | Analog |
| Case Material | Stainless Steel |
| Band Material | Stainless Steel |
| Dial Color | Black |
| Glass | Hardlex |
| Crystal | Hardlex |
| Movement | Quartz |
| Water Resistance | 100 meters |
| Features | Date Display |
| Functions | Date |
| Battery Life | 3 years |
To Next Page
