Seip TS 100 - Installation Instructions Manual

26 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

3V0

TS 75

TS 100

English

Installation Instructions

for garage door operators

This booklet must be handed over to the end-user

together with the user-manual.

and

Table of Contents

Default Chapter1
- Installation Instructions1
- Table of Contents2
Important Information for the Installer3
- Information and Remarks3
- Instruction for the Users3
Security Advises for the Installation4
- Installation5
Different Conditions for Installation5
- Bow Arm Conversion5
- C-Rail Extension5
- Door Arm Extension5
- Minimum Space above the Garage Door5
Pre-Mounting the Operator6
Installing the Operator7
The Emergency Release8
- When There Is a Second Entrance to the Garage8
- When the Garage Door Is the Only Entrance8
- Printed Circuit Board: Adjustments and Connections9
Devices for Adjustments9
- LERN/LEARN-Button9
- Potentiometer "LIGHT9
- Potentiometer "PRESSURE OPEN/CLOSE9
- TEST/RUN-Button9
Limit-Switch Adjustment and Force Measurement10
- Information10
- Adjusting the Maximum Force for the Learning-Cycle10
- Starting the Learning-Mode10
- The Limit Switch Adjustment10
- Starting the Learning-Cycle11
- Quick Reference11
Enhanced Adjustments12
- The BOTTOM Soft-Stop12
- Programming the BOTTOM Soft-Mode12
- Top Soft Mode12
- Enabling the Top Soft Mode12
- Reducing the Closing Speed13
- Why Reduce the Closing Speed13
- When to Reduce the Closing Speed13
- Programming the Closing Speed13
The most Important Connectors14
- LED "Diag16
- Led "Sea16
- Led "Sez16
- Led "Test16
- LED "Vp16
- Led „Lsz16
- Led „Slz16
Advanced Connectors14
- Push Button and Key Switch14
- 24V DC Supply14
- 230V AC Supply14
- Receiver-Module14
- Photo-Cell Without Selftest14
- Photo-Cell with Selftest14
- Safety Beam, Hatch Door, Emergency Stop15
- Modules for Special Functions15
- Cycle Counter15
LED-Lamps16
Special Functions17
- DIP-Switch Settings17
- Function 1: TOP Soft-Mode17
- Function 2:Automatic Force Measurement17
- Force Setting TS75 or TS10017
- Pre-Warning Light before Every Movement17
- Full Reversion in OPENING Direction17
- No Reversion on Security-Beam When Door Closed17
- Side Hinged Doors17
- Remote Control18
Programming the Hand Transmitters18
- Basics18
- Clearing the Receivers' Memory18
- Programming Transmitter and Receiver18
Additional Information19
- Criterias Influencing the Range19
- Use with a Homelink© System19
- Technical Information20
Technical Data20
- Module "Automatic Closing" (AZ)20
- Module "One Way Traffic Control" (EI)20
  - Maintenance20
- Module "Separated Impulse" (TO)20
Optional Special Functions20
Wiring21
- Internal Wiring21
- External Connections21
Spare Parts22
Troubleshooting23
- Troubleshooting23
- Declaration of Conformity24

Other manuals for Seip TS 100

User Guide8 pages

Related product manuals

Preview: Seip TS 75

Preview: Seip TM80

Preview: Seip TM 60

Preview: Seip C 75

Preview: Seip UK 60