Seko POOL BASIC EVO DOUBLE User Manual

0000136904 rev. 2.0
EN
DE
ES
FR
IT
POOL BASIC EVO DOUBLE
INSTRUCTIONS MANUAL
HANDBUCH
MANUAL DE INSTALACION
MANUEL D’INSTALLATION
MANUALE D’INSTALLAZIONE

Seko POOL BASIC EVO DOUBLE Specifications

General

Brand	Seko
Model	POOL BASIC EVO DOUBLE
Category	Lighting Equipment
Language	English

Summary

Pack Contents

Technical Specifications

Instruction Setting

Calibration

Routine for calibrating pH or Redox probes using buffer solutions.

Set Point Configuration

Adjusting and confirming desired measurement values for control.

Program Setup Menu

Accessing device configuration menus for language and measurement settings.

Redox Measure Settings

Configuring Redox measurement parameters like setpoint and alarm band.

pH Measure Settings

Configuring pH measurement parameters like setpoint, acid/alkaline, and alarm band.

Flow Control Input

Enabling or disabling the flow signal input for device operation.

Probe Calibration Options

Selecting calibration methods (Full, Easy, Off) for pH and Redox probes.

Password Setting

Setting or changing the device access password.

Pump Priming Function

Initiating priming cycles for redox and pH pumps.

Pump Lock Function

Locking or unlocking pump operation for safety or maintenance.

Main Board and Wire Connections

Wire Connections Diagram

Detailed list of inputs and outputs for the main board.

pH Probe Calibration Procedure

Redox Probe Calibration Procedure

Swimming Pool Application Overview

Alarm and System Settings

Configuring alarms, display, relays, and default parameters.