To Next PageTo Next Page
Need help?Do you have a question about the Sekonic SPEEDMASTER L-858D-U and is the answer not in the manual?
General| Sensor | Silicon Photo Diode |
|---|---|
| Custom Settings | Yes |
| Dustproof/Splashproof | Yes |
| Type | Light Meter |
| Measuring Modes | Incident, Reflected, Flash |
| ISO Range | 3 to 8000 |
| Shutter Speed Range (Ambient) | 1/8000 to 30 sec |
| Aperture Range | F0.5 to F161.2 |
| Cine Speed | 1 to 250 fps |
| Display | LCD |
| Wireless Communication | Bluetooth |
| Power Source | 2 x AA Batteries (Alkaline, Ni-MH, Lithium) |
| Operating Temperature | -10 to 50°C |
Details the specific functions and operations associated with each labeled part of the light meter.
Explains the steps for turning the light meter on and off, including startup and shutdown sequences.
Provides an overview of the standard workflow for taking measurements with the light meter.
Details how to switch between incident and reflected light measurement modes.
Covers ambient light measurement methods like T, F, T+F, and Illuminance/Luminance modes.
Details how to measure flash light using various modes like Cordless, Cord, Radio Triggering, and HSS.
Explains measuring brightness of flash activated in HSS mode without a meter-flash connection.
Covers measuring flash duration, time, and waveform using incident light.
Details how to save and recall measured values using the meter's memory function.
Covers using minus or plus compensation to adjust exposure for highlight and shadow details.
Allows adjusting the meter's calibration to match known compensation values or other meters.
Addresses common issues like the power not turning on or the LCD screen not responding.
Helps resolve problems with incorrect measured values or readings outside the specified range.
