Need help?Do you have a question about the Sekonic L-758 and is the answer not in the manual?
General| Type | Digital Exposure Meter |
|---|---|
| Aperture Range | f/0.5 to f/161.2 |
| Shutter Speed Range (Ambient) | 30 min to 1/8000 sec |
| Accuracy | ±0.1 EV |
| Display | LCD with Backlight |
| Operating Humidity | 85% or less (no condensation) |
| Custom Calibration | Yes |
| PC Sync Terminal | Yes |
| Measuring Modes | Flash |
| Light Receiving Method | Incident and Reflected |
| ISO Range | 3 to 8000 |
| Cine Speeds | 2 to 360 fps |
| Operating Temperature | -10 to 50°C |
| Memory | Up to 9 readings |
| Wireless Triggering | Optional Module Required |
| Measuring Range (Reflected) | EV 1 to 22.9 (ISO 100) |
Key warnings and cautions to prevent injury, death, or equipment damage during operation.
Instructions for attaching the strap and correctly inserting the battery.
How to set ISO sensitivity and configure jog wheel lock and button functions.
Guide on selecting and performing incident or reflected light measurements.
Measuring flash light using cord, cordless, and wireless triggering modes.
Setting up and using the meter for wireless flash synchronization via radio transmitter.
Using meter for Lux/FC, cd/m²/FL measurements and applying exposure/calibration compensation.
Personalizing meter preferences and settings for specific workflows.
Testing and calibrating the meter for specific camera or film sensitivities.
Methods to enter test data via software or manual input for profiling.
To Next Page