Need help?Do you have a question about the Sekonic L-758C and is the answer not in the manual?
General| Brand | Sekonic |
|---|---|
| Model | L-758C |
| Category | Measuring Instruments |
| Language | English |
Details hazard symbols, warnings, and essential safety measures for operation and handling.
Safe methods for replacing batteries, including warnings and reset procedures.
Guide to switching between incident and reflected light measurement modes.
Explains how to select various ambient and flash measurement modes.
Details using the Lumisphere in extended and retracted positions for accurate incident light readings.
How to align the viewfinder for spot metering and use optional accessories.
Step-by-step guide for setting shutter speed and taking ambient light measurements.
How to set the desired aperture and take ambient light measurements.
Instructions on how to activate and perform measurements using the EV mode.
Guide to setting cine speeds and adjusting for shutter angle in cinematography.
Steps for connecting the synchro cord and performing flash measurements.
Instructions for performing flash measurements without a synchro cord.
How to prepare the meter and take measurements in cordless flash mode.
Guide to selecting channels, zones, and system notes for wireless flash triggering.
How to use memory functions to store, recall, and average up to nine measurements.
How to increase exposure compensation in 1/10 EV steps.
Explains the necessity of profiling cameras and films for accurate exposure control.
To Next Page