Sekonic L-758C - Jog Wheel Lock Function

-9-
8. Jog Wheel Lock or Lock Off
1. Hold down the Mode button ⑩ and ISO1 button ⑪
and “LOC” will appear to indicate that the Jog Wheel is
locked. The last measurement is held until the lock is
released, even if the Jog wheel ⑤ is accidentally
moved.
However, if the measurement button ⑭ is pressed, a
new measurement is displayed with the same locked
settings.
2. To release the Jog Wheel lock, perform the same op-
eration for the Jog Wheel lock, Hold down the Mode
set button and ISO1 button and “Off” will appear to
indicate that the Jog Wheel lock is released.
Reference:
• If power of the meter is turned off or auto off is activated when in the Jog Wheel locked position,
the lock function will continue operating when the meter is turned on again.
3. Before Using