Sekonic L-758C User Manual

-12-
2. Setting measuring mode
1. Hold down the Mode button ⑩ and turn the Jog wheel ⑤ to
select the desired mode. The mode switching sequence is
shown in the chart below:
2. Modes enclosed in dotted lines
can only be selected with custom setting.
(See page 40)
3. Modes enclosed in
lines can only be selected with L-758DR. For L-758D and L-758CINE,
they can be selected when Optional Radio Transmitter Module is installed. (See page 28)
4. In addition to exposure reading, L-758CINE displays FC or LUX in incident light mode, and FL
or cd/m
2
in reflected light mode.(See page 34)
Reference:
• Available light is continuous light like natural light (sunlight) or tungsten lamps and florescent
lamps like pulsing light sources.
• Flash light is a brief, intense burst of light made by such as electronic flash units or flash bulbs.
4. Basic Operation
Wireless Multiple Flash
Radio Triggering mode
See page 28
Wireless Flash Radio
Triggering mode
See page 28
Wireless Flash channel
Setting mode
See page 28
Shutter Speed Priority mode
(Available light)
See page 15
Aperture Priority mode
(Available light)
See page 17
EV mode (Available light)
See page 18
LUX, FC
FL, cd/m
2
See page 34,35
Cord Multiple Flash
(Cumulative) mode
See page 24
with Radio
transmitter module
Auto Reset Cordless Flash
mode
See page 22
Cord Flash mode
See page 21
Cordless Multiple Flash
(Cumulative) mode
See page 25
with Radio
transmitter module
with Radio
transmitter module
→ CINE only

Sekonic L-758C Specifications

General

Brand	Sekonic
Model	L-758C
Category	Measuring Instruments
Language	English