-40-
*1 1/10 stop fractions are displayed in full, 1/2 and 1/3 step increments.
*2 Individual: LUX, FC, cd/m
2
or FL
Compound: LUX+T+F, FC+T+F, cd/m
2
+T+F or FL+T+F (combination)
*3 Auto-Switching:In incident mode,Measuring/Memory buttons are standard (as they
are),however,in reflected mode, automatically two buttons are switched.
Reference:
• Default settings are all set to zero (0).
6. Advanced Functions
9. Custom setting function
The following Custom Settings provide a quick and easy setup of individual meter preferences. All
preferences are stored on a memory chip and can not be deleted, they can only be changed back to
default settings.
To Next Page
Loading...
Need help?
General
