Need help?Do you have a question about the Sekonic DUALMASTER L-558 CINE and is the answer not in the manual?
General| Sensor | Silicon photodiode |
|---|---|
| Accuracy | ±0.1 EV |
| Aperture Range | f/0.5 to f/161.2 |
| Display | LCD |
| Power Source | 2 x AA batteries |
| Water Resistance | No |
| Film Speed Range | ISO 3 to 8000 |
| Measuring Modes | Ambient, Flash, Incident, Reflected |
| ISO Range | ISO 3 to 8000 |
| Shutter Speed Range (Ambient) | 1/8000 to 30 sec |
| Memory Capacity | 9 readings |
| Dimensions | 155 x 75 x 33 mm |
Instructions for inserting the CR123A lithium battery, ensuring correct polarity and closing the cover.
How to set the primary ISO film speed using the ISO1 button and Jog wheel.
How to select between incident and reflected light measurement modes using the selector dial.
Guide to selecting different measurement modes like Shutter Priority, Aperture Priority, and EV mode.
How to use the Lumisphere for extended or retracted measurements for 3D objects or flat copy.
Procedure for reflected light measurement, aligning the viewfinder circle and understanding measurement range.
How to set shutter speed and take measurements in Shutter Speed Priority mode.
How to set aperture (f stop) and take measurements in Aperture Priority mode.
How to measure and display EV values, along with corresponding shutter speed and f stop.
How to connect the flash via synchro cord and measure flash output.
To Next Page