Need help?Do you have a question about the Sekonic DigitalMaster L-758 Cine and is the answer not in the manual?
General| Light Receiving Method | Incident and Reflected |
|---|---|
| ISO Range | 3 to 8000 |
| Display | LCD |
| Flash Measurement | Yes |
| Spot Metering Angle | 1° |
| Incident Metering Angle | 180° |
| Repeatability | ±0.1 EV |
| Shutter Speed Range | 1/8000 to 30 sec |
| Aperture Range | f/0.5 to f/90 |
| Power Source | 2 AA batteries |
| Weight | 275 g (without battery) |
| Memory Function | Yes |
| Calibration Constant (Reflected) | k=12.5 |
| Type | Digital Exposure Meter |
| Measuring Range (Incident) | EV -2 to 22.9 (ISO 100) |
| Dimensions | 155 x 75 x 33 mm |
Icons indicating measurement modes such as Ambient, Flash, etc.
Icons indicating whether the device is in Incident or Reflected Spot mode.
Displays the selected ISO film setting.
Shows the percentage of flash in the total exposure.
Indicates applied exposure or calibration compensation.
Shows aperture, EV, Brightness Difference, Average, and EV modes.
Displays aperture/latitude scales and measured values.
Shows shutter priority mode and shutter speed display.
Displays the current battery power level.
Shows memory status and multi-flash measurement details.
Displays radio triggering channel and quad-triggering zone.
Indicates the selected camera profile.
Indicates when a USB cable is connected.
Shows shutter angle settings, particularly for cine modes.
Displays units for illuminance and luminance measurements.
To Next Page