Sekonic DIGI LITE F L-328 User Manual

SEKONIC
DIGI LITE F L-328
Operating Instructions

Sekonic DIGI LITE F L-328 Specifications

General

Light Receiving Method	Silicon photodiode
Aperture Range	f/0.5 to f/90
Display	LCD
Measuring Modes	Ambient, Flash
ISO Range	ISO 3 to ISO 8000
Shutter Speed Range (Ambient)	1/8000 to 30 sec

Summary

Preparing the Meter for Operation

Inserting the Battery

Step-by-step guide for inserting the AA battery correctly, noting polarity.

Selecting Measuring Mode

Instructions for choosing between wireless flash, wired flash, or ambient light modes.

Setting Meter Parameters

Setting ISO Sensitivity

How to adjust the film speed (ISO) using UP/DOWN keys for accurate measurements.

Setting Shutter Speed

Guide to setting shutter speed, prioritizing T (shutter speed) priority use.

Wireless Measurement with Flash Unit

Mode Selection for Wireless Flash

Activating wireless flash mode and confirming the indicator symbol on display.

Setting Parameters for Wireless Flash

Setting film speed and shutter speed for wireless flash measurements.

Initiating Flash Measurement

Wired Flash Measurement with Synchro Cord

Setting Mode for Wired Flash

Connecting and Firing the Flash

Ambient Light Measurement

Setting Parameters for Ambient Light

Performing Ambient Light Measurement

Post-Measurement Calculation

Adjusting ISO Sensitivity

Adjusting Shutter Speed