Sekonic DIGI LITE F L-328 User Manual

Post-Measurement Calculation
1. By changing ISO sensitivity the measured
F-stop value will automatically be altered
to the appropriate one corresponding to
the changed ISO value (Fig. 16)
This post-measurement calculation is ap
plicable to all measuring modes, wireless
and wired flash light measurement, and
ambient light measurement.
2. By changing the shutter speed (l) the
measured F-stop value will automatically
be altered to the appropriate one cor
responding to the changed T value
(Fig. 17).
Post-measurement calculation for shutter
speed (1) is only applicable to the am
bient light measuring mode. If you make
post-measurement calculation for T in
flash light measuring mode, the indicated
F-sto
p
value will turn into 0.

Sekonic DIGI LITE F L-328 Specifications

General

Brand	Sekonic
Model	DIGI LITE F L-328
Category	Measuring Instruments
Language	English