The procedures for taking measurements when using
a movie camera are the same as for taking ambient
light measurements. Keep depressing the UP side of
UP/DOWN key. Then, after the display of 1/8000 sec.,
cine scales for 8, 16, 18, 24, 32, 64 and 128 fps. will
be displayed, one after another. At the same time, the
symbol C will be indicated on the display (Fig. 15).
5. By pressing F/EV key the F/number display will
be changed to the EV/number display, and vice
versa. In case of EV mode the bar-dot symbols
are not indicated on the display (Fig. 14).
Note: The notes for wireless measurement
are also applicabel to ambient light
measurement.
8
To Next Page
Loading...
