Sekonic L-758C User Manual

-45-
ENGLISH
7. Camera Exposure Profiling
2-2 Manual Exposure Profile Input
It situations where it is not possible or convenient to use a computer or the Sekonic Data
Transfer Software, Exposure Profile data can be entered into the L-758DR (L-758D or L-758CINE)
directly. Below is the step by step process for manually entering a specific Exposure Profile.
1) With the meter turned off,enter the Camera Expo-
sure Profile mode by pressing the Power button
⑫ while pressing the AVE../ ⊿ EV button ④ at
the same time..
2) In the Camera Exposure Profiling mode, the cur-
rent (or preset) contents are displayed.
3) Setting Individual Exposure Profiles (Camera 1, 2
and 3)
Press MID.TONE button ⑳ while pressing ISO1
button ⑪ to select the desired camera exposure
profile.
4) Setting measuring mode
Rotate the Jog wheel ⑤ while pressing the Mode
button ⑩ to select measuring mode (ambient or
flash including all flash mode)
5) Setting light receiving method
Turn the Incident/reflected spot selector dial ⑲ to
select incident or reflected light.
6) Setting ISO sensitivity
Rotate the Jog wheel ⑤ while pressing the ISO1
button ⑪ to select ISO sensitivity.

Sekonic L-758C Specifications

General

Brand	Sekonic
Model	L-758C
Category	Measuring Instruments
Language	English