Sekonic SR-6500 - Cleaning Procedures

-99-

Cleaning procedures
Main body unit
1.
Turn the power off and remove the power cord from the outlet.
2.
Grasp the lock lever to release the lock, and push the top cover up to open it.
3.
Remove the stopper. (1 screw)
4.
Clean necessary parts.
5.
Install the stopper. (1 screw)
Warning)
If there is no stopper installed,
fingers and other body parts
could be pinched and injured
by the back hinge.
6.
Close the top cover.
Slowly close the top cover and press it until there is a click sound that indicates it
is locked.
Cleaning

Cleaning procedures
SR-3565(E).indd99SR-3565(E).indd99 2007-8-1610:21:132007-8-1610:21:13