13
6. STANDARD ACCESSORY OPERATION
e. Press stopper button !3, and read meter scale footcandle indica-
tion e. However, since footcandles are units of incident light only,
this value becomes simply a reference.
f. Transfer indicated value to dial scale u. Rotate the dial ring !6
and set mark o.
g. At this time, shutter speed scale !4 and aperture scale !5 combi-
nation becomes the correct exposure.
Note:Do not employ slides for reflected light measurement.
※ More accurate results can be obtained for reflected light mea-
surement by using a Gray card (optional accessory).
▲
H
To Next Page
Loading...
