Need help?Do you have a question about the Selco Quasar 320 MSE and is the answer not in the manual?
Illustrates and explains important safety symbols used in the manual.
Ensures safe operating conditions, temperature, and absence of hazardous substances.
Protects users and others from welding hazards like radiation, sparks, and heat.
Guidelines for managing welding fumes and ensuring adequate ventilation.
Measures to prevent fires and explosions during welding operations.
Safe handling and use of pressurized gas cylinders.
Precautions to prevent electrical hazards and shocks during welding.
Managing electromagnetic fields and potential interference with other equipment.
Details the equipment's ingress protection rating against solids and liquids.
Safe methods for moving and handling the welding equipment.
Guidelines for placing the equipment in a suitable and safe location.
Instructions for correctly connecting the power supply and earth.
Specific connection setup for Manual Metal Arc welding.
Introduction to the QUASAR... MSE Series welding systems.
Description and function of controls and indicators on the front panel.
Identification of connections and switches on the rear panel.
Layout and function of the sockets panel for connections.
Theory and techniques for Manual Metal Arc welding.
Theory and methods for MIG/MAG welding processes.
Overview of gases used in MIG/MAG welding and their properties.
Detailed explanation of symbols and data found on the generator's rating plate.
General| Input Voltage | 3x400 V |
|---|---|
| Welding Current Range | 30-320 A |
| Duty Cycle | 60% at 320 A |
| Protection Class | IP23 |
| Output Current Range | 30-320 A |
| Rated Input Voltage | 3x400 V |
| Input Frequency | 50/60 Hz |
| Efficiency | 85% |
| Power Factor | 0.93 |
| Welding Process | MIG/MAG |
To Next Page