Selec PID500 User Manual

S.P.High limit
S.P. Low limit
Change password New password
Hand O/P
%age
P.B - main Integral
time
Derivative
time
Manual
reset
P.B - cool
Change
password
New
password
INPUT
PARAMETERS
OUTPUT
PARAMETERS
(main output)
*ALARM 2 MODULE
(output 3) (optional)
LOCK MODULE
(online
parameters)
LOCK MODULE
(levels)
Detailed description of the above levels will be provided as an addendum with the
respective models.
NOTE:- LEVEL 5- Communications Module.
LEVEL 9 - Heater current monitor input.
LEVEL 10 - Motorised input / Remote set point input.
SPECIAL
FUNCTIONS
AUXILIARY OUTPUT
MODES (output 2)
Latch alarm Hold alarm
Alarm status
Annunciator Analog Low
Scale
Analog High
Scale
Sensor error
level
14
Integral time
Derivative time
Derivative approach
control
Cycle time
Cycle time (user)
Anti reset windup
ARW percentage
Manual reset
Proportional
band - heat
Timer
Sensor open
selection
Sensor fail
power level
P
V bias
Filter time
constant
Rounding
increment
Standby mode Reset all
Soak time
O/P
power
dampening

Selec PID500 Specifications

General

Mounting	Panel Mount
Operating Temperature	0 to 50°C
Input Type	Thermocouple, RTD
Control Type	PID, On/Off
Output Type	Relay, SSR
Supply Voltage	85 to 270 VAC
Display	Dual, 4-digit, 7-segment LED
Size	48 x 48 mm
Accuracy	±0.25% of F.S. ±1 digit